2. Complete stock body  pipe Bumpers allowed. MUST be chained or secured to frame in a manner to keep them from dropping onto or dragging along track. Grill may be removed and replaced with expanded metal.
3. MINIMUM WEIGHT: 3300 lbs. with driver. BODY AND FRAME MUST MAINTAIN 4 ½ "AT FRAME RAILS. GROUND CLEARANCE.NO SLIDERS ON LEAF SPRINGS.MUST BE IN STOCK LOCATION ON FRAME.FRONT SHOCKS OR STRUTS MUST BE MOUNTED IN STOCK LOCATION.MUST HAVE FACTORY  STRUT TOWERS.NO COIL OVER SHOCKS. NO TORQUE ABSORBING DEVICES  PERIOD.
4. All doors MUST be welded, chained or bolted closed. Exterior chrome MUST be removed.
5. All glass (including headlights, taillights, etc.) MUST be removed. WINDOW NET IS  REQUIRED ON DRIVER’S DOOR WINDOW.MUST HAVE STOCK FLOOR PAN&FIREWALL BACK TO TURN UP.
6. Gauges may be removed. All flammable interior (carpet, headliner, interior side panel, rear sets etc.) MUST be removed. Racing seats only! Wiring harness may be removed and replaced.
7. MUST HAVE  FIREWALL BETWEEN DRIVER AND FUEL CELL 
8.  Holes in firewall MUST be covered with metal. Battery is to be securely fastened.& HAVE COVER IF IN DRIVERS COMPARTMENT
9. Quick Steer allowed.
10. ENGINE SET BACK.#1 SPARKPLUG LINED UP WITH BALL JOINT.
11. All Hobby Stock Cars must run track tire. MUST BE ASPHALT PULL-OFFS NO NEW TIRES, 10" Steel Wheels. *Right side Bead-Locks allowed
12. Safety harness no more than 3 years old. 5 point mandatory. Aluminum racing seats only, No fiberglass.

ENGINE AND DRIVE TRAIN

Engine must have been available in vehicle (year may be interchanged). No aftermarket blocks allowed Must have stockAPPEARING distributors-NO MSD’s. Super Coil allowed

13. HOLLEY 4412. 500CFM with throttle bore no bigger than 1 11/16, HOLLEYS ONLY!.NO AEROSAL BILLET CARBS MUST HAVE STOCK VENTURIS

14. Brake pedal assembly allowed.

  15.     Cams must not pull less than 16 inches of vacuum at 1000 RPM, Headers allowed